SOLITÄR®
MIKROPOR S CANOPY

 

STRAIGHT
CONCAVE
CONVEX


ACUSTIC PARTIAL AREAS MADE OF WOOD

Acoustic partial areas from Lahnau Akustik GmbH are real all-rounders. They can absorb or reflect sound, feed fresh air or dissipate heat (special version). Our acoustic partial areas made of wood can be manufactured in curved, concave and convex shapes. They can be produced to allow the integration of different lighting variants. With so many options available architects have the freedom to choose from a wide range of variations.

Advantages:

  • Ideal for upgrading
  • Easily installed with filigree hangers
  • High light reflectance
  • Individually positionable
 
 
  • SOLITÄR® MIKROPOR S CANOPY
  • SOLITÄR® MIKROPOR S CANOPY
  • SOLITÄR® MIKROPOR S CANOPY
  • SOLITÄR® MIKROPOR S CANOPY
  • SOLITÄR® MIKROPOR S CANOPY
  • SOLITÄR® MIKROPOR S CANOPY
 
 
 
 

Material:
Lightweight chipboard made from coniferous wood using formaldehyde-free binder.

Surface:
Acoustic membrane with matt, smooth and non-directional surface, optionally available as sound absorbing (S) or sound reflecting (ST)

Surface colour (visible side):
White, similar to RAL 9010 (light reflectance value > 90%)
In special colours as per sample on request or Imagio S Design in different colours and structures.

Care / refurbishing:
It is possible to clean localized soiling using a damp synthetic sponge or brush.
Vacuum clean with vacuum cleaner and brush attachment
Refurbishable by spraying with Wilhelmi acoustic paint (WAF-R), without any loss of sound absorption properties.

 
 

Rear:
Acoustic membrane (without colour coating)

Edge configuration:
All sides covered with edge tape in the same colour tone as the surface

Panel thickness:
Approx. 18 mm

Dimensions:
2500 x 1250 mm; other dimensions possible on request

Acoustical cloud curved:
Radius approx. 6000 mm or 8000 mm, other radii (> 6000 mm) possible on request

Building material class:
B2 normal flammable to DIN 4102

Weight per unit area:
Approx. 9 kg/m2

Total weight:
Approx. 33 kg

 
 

Hanging:

Thin wire hangers, wire lengths approx. 2000 mm, longer lengths available on request

Installation:
Affix supplied framework assembly kit to the rear of the panel. Fit the bottom parts of the wire hangers to the longitudinal members. Fit the top parts of the wire hangers to the solid ceiling together with the wires. Feed the wires into the bottom parts of the wire hangers and adjust their height. The wire hangers can easily be adjusted to any desired length

Lighting:
It is possible to integrate and adapt lights

System solutions on request

 
 
 
 
 

Products from Lahnau Akustik offer numerous design options. We offer a huge choice of special colours and surfaces. We are happy to offer advice.

 

Surface:
Acoustic membrane with matt, smooth and non-directional surface, optionally available as sound absorbing (G) or sound reflecting (GT)

Surface colour (visible side):
In special colours as per sample on request; optional antistatic, water-repellent special coating

 
 

MIKROPOR® G
Non-directional, fine-pore structured colour coating light reflectance value (white) > 90% (diffuse: 0.9)

MIKROPOR® GT
This version as Mikropor G but sound reflecting.

MIKROPOR® G PATINA
Non-directional, matt, smooth coloured surface coating

 
 
 
Colours and surfaces Mikropor G
 
 
 

(the colour and structure shown in images of surfaces can differ slightly from the original)

* Special colour

 
 
 

We would be more than happy to send you a sample.
Feel free to contact us.

 
 
 

We develop effective acoustic building materials in close cooperation with scientists, clients, architects and contractors. Utilizing these high-quality materials facilitates optimum speech intelligibility in our built-up environment.

At the same time, the design options available with regard to material, surface, colour and shape are so varied that it is possible to efficiently combine the demands placed on man and an eco-friendly architecture with one another on the basis of the latest scientific findings.

 

A variety of acoustics tests are available to download from the Download archive under Downloads zur Verfügung.

 
 

Sound absorption curve SOLITÄR® MIKROPOR G CANOPY STRAIGHT

Sound absorption curve
 
 
 
 
 
 

Hanging

Thin wire hangers, wire lengths approx. 2000 mm, longer lengths available on request.

 
 

Installation

Affix supplied framework assembly kit to the rear of the panel. Fit the bottom parts of the wire hangers to the longitudinal members. Fit the top parts of the wire hangers to the solid ceiling together with the wires. Feed the wires into the bottom parts of the wire hangers and adjust their height. The wire hangers can easily be adjusted to any desired length.

 
 

Framework construction

4x aluminium T-profiles DP 621 fastened on the rear of the panel to factory specification.
2x aluminium support profiles DP 620, curved / straight*), inserted parallel the longitudinal edge of the panel in the aforementioned T-profiles and secured with fixing bolts.

 
 
 
 
 

1. Cleaning

  • Before cleaning with a damp cloth, carefully remove surface dust with a brush or vacuum cleaner.
  • It is possible to remove localized soiling such as fingerprints or trails of soiling close to air outlets using a firm, damp sponge together with a commercially available household cleaner or Moisture-Clean (available as a powder from Lahnau Akustik) in the respective recommended concentrations.
  • Then carefully wash down the cleaned surface with clean, clear water and dab dry with an absorbent cloth or paper (kitchen roll).
  • We recommended you test clean an inconspicuous area each time before cleaning.
 

Professional refurbishment must be carried out using Wilhelmi acoustic paint WAF-R 86 (special colours WAF-R 87).

  • Quantity used during refurbishment: 400-700 g/m² depending on the degree of soiling
  • Ensure the room temperature does not fall below 12 °C when applying the coating; the relative humidity should not exceed 70%.
  • Once applied immediately ensure the rooms are ventilated and dehumidified.
 
 

2.1 Refurbishment

If the acoustic ceiling has become heavily soiled after many years of normal use and can no longer be cleaned properly, it is possible to restore it to a condition virtually as good as new by applying a refurbishment spray.

When applied professionally in accordance with the manufacturer’s instructions the acoustic absorbency of the wall or ceiling surface is not impaired. The refurbishment can be repeated several times, if required.

Under no circumstances should emulsion paints be applied to the surfaces using a brush or roller, otherwise the sound absorbing properties will be lost.


It is only possible to guarantee the acoustic characteristics will be retained by engaging a professional company that uses the appropriate coating machinery to professionally apply the refurbishment spray, e.g.,

Strobl Beschichtungstechnik GmbH

Hermann-Volz-Straße 50
D-88400 Biberach/Riß

Tel.
+49 7351/4400-0
Fax +49 7351/4400-60

 
 
 
 
 
Schools & kindergartens Sports halls Hospitals
Theatres & concert halls Banks & insurance offices Office & administration
Indoor shooting ranges Private properties Indoor swimming pools
Wall cladding Bars and restaurants
 
 
 

Quality management

It is possible to achieve continual improvement with the aid of quality management by involving all members of staff and optimizing company procedures across all departments. Fulfilling customer requirements is central to all we do. An integrated management system for quality, environment and occupational health and safety according to EcoStep.


Environment management

As a manufacturer of environmentally friendly products based on the raw materials glass and metal Lahnau Akustik GmbH is passionately committed to protecting the environment. We wish to contribute towards balancing economy and ecology with the aim of achieving a sustainable development taking into consideration the needs of people and nature.


The ecological benefits of acoustic panels made of recycled glass:

  • 100% recycled glass
  • Sustainable
  • Conserve natural resources
  • Winner of many ecological awards
  • Optimize your LEED rating
  • Healthy home environment “built-in”
  • Reduce CO2
  • Optimize heat insulation
 
 

With you in mind, we have introduced:

An integrated management system for quality, environment and occupational health and safety. An expert assessment documented in a report verifies that the management system fulfils



requirements and, as a consequence, the core stipulations of the following standards:
ISO 9001:2000
ISO 14001:2004
ILO guidelines on occupational safety and health (2001)