MAKROPOR® L

 

Panels perforated on visible side (acoustic fleece on rear)

The product MAKROPOR® L meets the standards of quality specified by the Association of Industrial Metal Ceiling Manufacturers (TAIM). It consists of electrolytic galvanized sheet steel; the standard version is coated with a white coloured powder coating. Versions are also possible in all RAL and NCS colours.
Thanks to the large selection of perforations as well as the wide variety of formats (lengths: 601 mm to 3200 mm widths: 250 mm to 960 mm) it is possible to adapt the product perfectly to on-site conditions.
The thermal conductivity of the metal material ensures the product is eminently suitable for use in cooling ceiling systems.

Advantages:

  • Large selection of different perforation patterns
  • Variety of formats
  • Version possible with numerous constructions
 
 
  • MAKROPOR® L
 
 
 
 

Base panel:
Electrolytic galvanized sheet steel to DIN 1541

Surface:
Powder coating20
Colour white, reflectance 20%, film thickness 80-100 µm

Perforation:
As depicted, other perforations possible on request. Blank version also possible.

Building material class:
A2 (s1, d0) (non-flammable)

 
 

Panel types:
See chapter Constructions & details

Sheet metal gauge:
0.6 mm or 0.7 mm according to panel dimensions

Formats:
Lengths: 601 mm to 3200 mm
Widths: 250 mm to 960 mm

Spacer studs:

  • 3 mm / 5 mm*
  • White / black *
 
 

Joint tape:
3 mm, black; other versions available only on request

Sound absorption level:
See measuring curve in the chapter Acoustic test certificates

Tolerances:
According to TAIM quality standards for metal ceilings

 
 
 
 
 
Standard perforations Makropor L
 
 
Standard perforations Makropor L
 
 
 
Standard perforations Makropor L
 
 
Standard perforations Makropor L
 
 
 
 
Standard perforations Makropor L
 
 
Standard perforations Makropor L
 
 
 
 
 

Standard perforations:
2.5 mm and 8.00 mm diameter, straight or staggered.
Other perforation patterns – e.g. square possible on request.

 
 
 

Surface:
Powder coating, colour white, reflectance 20%, film thickness 80-100 µm

 
 

Colours:
Powder coatings available in all special RAL colours.

 
 
 
 
 

Constructions & details:

Information about the following constructions is available here:

 
  • Electrolytic galvanized sheet steel to DIN 1541, perforated percentage of total area: 16-22%
  • Formats:
    Lengths: 597-3000 mm; other lengths on request
    Widths: 250-625 mm; other widths on request
 
 
Lahnau acoustic panels, Mikropor M, standard type 1
 
 
 
 
 
  • Clamping system
  • With precise shadow joint between the metal acoustic panels
  • Removes straight downwards without needing to first lift upwards
 
 
Clamping system 410
 
 
 
 
 
  • The universal ceiling system
  • Ceiling void easily accessible at any point in conjunction with rigid, torsionally resistant support structure
  • Possible to remove and reinstall without tools
 
 
Lay-on system with concealed support structure 110
 
 
 
 
 
  • The economic ceiling system for stud partition walls, for example in administration buildings
  • Tested longitudinal sound insulation with 12.5 mm gypsum plasterboard and 30 mm acoustic foam covering
 
 
Visible C-channel (Bandraster) grid system 160 - parallel
 
 
 
 
 
  • The ceiling system for stud partition walls in both directions
  • Tested longitudinal sound insulation with 12.5 mm gypsum plasterboard and 30 mm acoustic foam covering
 
 
C-channel (Bandraster) grid system 170 - crosswise
 
 
 
 
 
  • Installation with wall angle
  • Installation with step angle
  • As concealed lay-on system
  • F30 Corridor ceiling systems on request
 
 
Ceiling system for corridors with step angle
 
 
 
 
 

For more information about constructions and details go to Wall cladding systems.